Hardwax Oil Products

SHOWING 11–15 OF 15 RESULTS

  • Treatex Hardwax Oil Natural – 2.5lt

    Treatex Hardwax Oil Natural can be used in two different way
    Quick Overview

    Treatex Hardwax Oil Natural can be used in two different ways:
    1) as a base coat which is designed to neutralise the colour change caused by applying Treatex Hardwax Oil Clear. To change the appearance of light coloured timbers such as oak as little as possible, brush (not roller) on a thin coat of Treatex Hardwax Oil Natural on to unfinished timber, before sealing with clear Treatex Hardwax Oil. Treatex Hardwax Oil Natural should not be used as a base coat on darker coloured timbers.

    2) as a top coat on top of our Spruce Colour Tone. For a whiter white seal our Spruce Colour Tone with two coats of Treatex Hardwax Oil Natural.


  • Treatex Preparation Cleaner 1lt

    Treatex Refreshment Cleaner is an aggressive cleaner which p
    Quick Overview

    Treatex Refreshment Cleaner is an aggressive cleaner which prepares surfaces for finishing with Treatex Hardwax Oil or refreshing with Treatex Wax Polish. Dilute 50 ml of Treatex Refreshment Cleaner in 5 litres of water. Mop the surface with this solution, ensuring that the mop is only damp and never wet. After using the solution, mop the floor with clean water to remove any residue. Leave to dry for approximately 3 hours before finishing/refinishing with Treatex Hardwax Oil or refreshing with Treatex Wax Polish.


  • Treatex Preparation Cleaner 5lt

    Treatex Refreshment Cleaner is an aggressive cleaner which p
    Quick Overview

    Treatex Refreshment Cleaner is an aggressive cleaner which prepares surfaces for finishing with Treatex Hardwax Oil or refreshing with Treatex Wax Polish. Dilute 50 ml of Treatex Refreshment Cleaner in 5 litres of water. Mop the surface with this solution, ensuring that the mop is only damp and never wet. After using the solution, mop the floor with clean water to remove any residue. Leave to dry for approximately 3 hours before finishing/refinishing with Treatex Hardwax Oil or refreshing with Treatex Wax Polish.


  • Treatex Thinner (Isoparaffin) 1lt

    When treating oily or dense timbers e.g. iroko, sovaldi ipe
    Quick Overview

    When treating oily or dense timbers e.g. iroko, ipe, teak, jarrah, merbau etc. thin the first coat of Treatex Hardwax Oil Clear with approximately 10% Treatex Thinner (Isoparaffin). This allows the product to properly penetrate into these type of timbers.


  • Treatex Wax Polish 1lt

    Treatex Wax Polish is an easy to apply clear polish designed
    Quick Overview

    Treatex Wax Polish is an easy to apply clear polish designed to refresh worn wooden surfaces finished with Treatex Hardwax Oil. Treatex Wax Polish forms a durable, water repellent and non slip finish. Treatex Wax Polish can be wiped on using a lint free cloth or buffed on using a slow machine with a white pad.